GEOPHYSICAL - for the detection, and graphical separation of metal targets from voids and other geological features.
Uses ground transmitting and receiving probes for data collection.
The geophysical system is offered either in 4 probe or 22 probe operation.
  • MAGNETOMETER - a super sensitive 80cm. gradiometer antenna reveals soil magnetic field disturbances caused by voids, ferrous metals, foundations, walls
   • METAL DETECTOR - for selective rejection of non valuable metal targets
Compare results from all 3 systems on the survey area, to increase reliability for the suspected targets
Underground images in real time:
No time lost to record the area and then send data to a computer to see what you have found.
As you walk with the sensors or while you moving the probes
-depending the mode you use- the EXAMINER shows the underground image immediately.
Professional users can also use filters to reveal the images manually adjusting the target strength
from the background soil interference.
Choose the graphics you want before or while you investigate:
3 high resolution graphic types offered to select from
he basic 2D GRID graph - grid blocks are colored according the data variations,
has a target depth calculator and co-ordinate indication, this way you see exactly
where the target is and you can pinpoint it again at your next visit.
The high resolution 2D CONTOUR graph - that smoothes out the targets shapes outlining their properties, colourful and detailed.
The highest resolution ever 3D rotatable graph - select the area part you want,
or just click on 3D to see the whole 3D view of underground
that is automatically rotatable to investigate target shapes from any viewing angle.
Numerous features for all graphic types assist to target analysis.
Select the best sweep direction:
According to the field layout, the obstacles on your way and your starting position,
8 sweep directions are offered. Choose the suitable direction you want to investigate the field,
before starting the survey.
Unlike other systems the user is not limited to search only from right to left.
Enter to the EXAMINER computer how many sweep lines and steps per line you estimate
are needed to walk the area. The EXAMINER will then prompt you to step or to turn to the next sweep line with voice commands!
2 Data collection modes manual and auto:
For uneven ground when a standard pace cannot maintained, select manual mode,
then after every step you make or probes you move (depending the mode used),
click on “CAPTURE” and see what is found.
On flat ground use auto mode, and input to the computer the time (seconds) needed to make a step, click “START”.
The computer will give you voice and visual signals when to step, turn or complete the survey.
Your ears prompt you to step, turn or stop and your eyes see the results immediately.
If you encounter obstacles on your way like trees or rocks you can pause the data collection,
pass the obstacle and start it again